Another Secret to Tangle-Free Cables
Keeping cables securely coiled during transport and storage is important if you wish to keep them from turning into a rat's nest before the next use. There are a number of ways to accomplish this simple task.
Cloth-backed hook-and-loop fasteners which are permanently attached to one end of the cable are easy to use but can be expensive. Inexpensive alternatives to the ever-popular Rip-Tie, such as VELCRO brand ONE-WRAP can be purchased from computer supply houses; they are used to bundle cables at network hubs.
Cheaper still are ties made of black stage cord and ordinary clothesline. Secured to the cable end with a simple half hitch and tied around the coil with a bow-knot, this rugged wrap will keep even heavy power and coaxial cables tidy. By the way, attaching any of these ties 6- to 12-inches from the connector instead of right at the end prevents overstressing the most fragile part of the cable.
Tape is a quick and easy but less-favored option because the adhesive tends, over time, to transfer to the cable jacket. Stick to cloth-backed electricians tape, which seems to leave less residue than vinyl tape, and avoid gaffers tape for anything other than short-term storage for the same reason.
Nylon tie-wraps are another effective but less-desirable option owing to the fact that they must be cut off before the cable can be used again. The jackets of tie-wrapped cables can be damaged if the tie is secured too tightly or if care is not taken when cutting off the nylon tie.
To view on TV Technology website, click here
Copyright 2017 Miller Camera Support